|
A brief
selection of some of the second hand machines currently in stock. "Click
the photos to see a larger image." |
|
A brief
selection of some of the second hand machines currently in stock. "Click
the photos to see a larger image." |
| Photos | Machine | ID | Presses and Coil Equipment |
|
|
64A | 2894 | 15 ton adjustable table press in excellent condition. New items fitted include: complete slide assembly, flywheel guard and fixed die guard. |
|
|
202A
(3)
|
2960 | 17
ton press new foot pedal, Anchor stud & RH bearing. Excellent
condition.
|
|
|
202A
(3)
|
2946 | 17
ton press. This machine is in very good condition
and is fitted with a near new interlocking die guard. New main
frame bush and cam plate spring.
|
|
|
202A
(3)
SOLD ! |
2961 | 17
ton press. This machine came to us in good condition, so all that
was needed was to replace the brake shoes and anchor.
|
|
|
202.5A
(3)
|
2962 | 23
ton press with new interlocking die guard, main frame bearing, clutch
key & spring. Also comes with a spare Crankshaft & Brake shoes,
great bargain !
|
|
|
Wallbank
20A
|
2937 | 20
ton press. This machine is almost as traded and is in fair
condition, with good bearing clearances but lightly scored slide.
It is fitted with a 40 x 100 x 1 air feed and adjustable die guard.
Un-painted. (Flywheel guard not yet fitted)
|
|
|
203A
(3)
|
2943 | 30 ton press. New lube lines & fittings, main frame bearing, brake anchor stud, V-belts, air treadle,air service unit. |
|
|
203A
(3)
|
2967 | 30 ton press in " as is " condition, with interlocking die guard. Three new bearings, very good condition. Not painted. |
|
203A
(3)
|
2969 | 30 ton press in excellent condition,painted with interlocking bi-parting die guard. |
|
|
206A
(3)
|
2966 | 60 ton press. Late model machine in excellent condition with full interlocking die guard. |
|
|
506A
|
2932 | 60 ton press with friction clutch, roll feed & variable stroke. As traded ( clutch is ok, variable stroke bush is " very tired ", roll feed a bit rough ). Take as is , or call us for a price to bring back painted & in excellent condition. |
|
|
Friction
Clutch
Units |
New | Brand new, to suit 203A (3) or (4) presses. High speed friction clutch units (to 500 spm). Low speed friction clutch units (to 200 spm). |
|
|
Wallbank
353
|
35
ton press. This machine is as traded and is in reasonable
condition with interlocking die guard but has a broken die cap.
|
|
|
|
730A
|
2880 | 30 ton high speed double crank press. 150 - 500 spm. Photo is of a 730A recently sold. |
|
|
HME
2-45-30-18 High Speed Press
|
2764 | 45
ton, straight sided, double crank, high speed press with 6" wide
single roll feed. The machine
has a 1" stroke, 8" shut height, 30" x 18" bed area and will
normally run from 100 to 300 spm (but fitted with fixed speed at
present).
It is in good condition.
|
|
|
207AG
(3)
|
2964 | 80 ton geared press in excellent condition, with variable stroke, new clutch key, lube lines & fittings, air service unit. |
|
|
207AG
(2)
SOLD ! |
2940 | 80 ton geared press in good condition. Painted with full interlocking die guard, ball race conversion, new air service unit, one shot lube system. |
|
|
207A
(3)
|
2938 | 80 ton press with friction clutch. This machine is as traded and is in good condition. Un-painted. |
| Accessories
|
Scrap
cutters: to suit 203A presses
Die cushions: to suit 205A, 206A and 207A presses. Air feeds: see Wallbank 20A above Roll feeds: to suit 202A, 203A, 205A and 207A Cam feeds: Vamco 150 x 3, Ferguson Camtrol MH2M 150 x 2 Coil reels: Clark's horizontal unpowered 150 kg x 915 dia Tonnage monitor: Toledo model N401 |
||
|
Machines Wanted |
|||
|
We are always looking for the following machines: 202A (3), 203A (3), 206A (3), 207AG (any series), 48BP, 108B and 118B
|
|||
| Photos | Machine | ID | Sheet Metal Machines |
|
|
108B
|
2968 | 8 foot John Heine guillotine in excellent condition with one shot lube system. |
|
|
50J | New | 915 x 0.8 mm bench grooving machine - brand new. This new machine is used for closing the long seam on a flue or downpipe. |
| Photos | Machine | ID | Can Making Machines |
|
|
60D | 2886 | press with mandrel (for closing side seams or punching holes in sides of drums) sold as traded. |
|
|
52D | New | Can seamer - manual, bench mounted, single head machine - 15 cans/min. |
|
|
Complete can line - almost | Almost complete can line for 3 piece hooked side seam can making at 350 cans per minute, comprising the following machines: | |
|
|
600G | 2460 | Side seam body maker. 211 to 401 dia (tooled for 301 dia?) 500 cans/min. |
|
|
200T | 2462 | Body flanger. 202 to 406 dia, 500 cans/min. |
|
|
601A | 2495 | Double die end press. 25 tons, 350 strokes/min. |
|
|
45C | 2523 | Tinplate slitter. 30" wide hand fed power machine. |
|
|
600D | 2839/40 | End seamers - 600 cans/min. |
| Machine | Machines in Progress | ||
|
|
730A | 30 ton high speed double crank presses | |
| 200A (3) | 2973 | 4 ton press | |
|
|
200A (4) | 2956 | 4 ton press |
|
|
Cincinnati | 2954 | 30 ton press with friction clutch |
|
|
207AG
(3)
|
2970 | 80t Press - New Crankshaft, bearings, brake shoes, ballscrew, V-Strips, Clutch key & spring, Auto lube, V-Belts, interlocking die guard. Will be in excellent condition when complete. |
|
|
203A
(3)
|
2971 | 30 ton press with friction clutch conversion, will be guarded & in excellent condition when complete. |
|
|
202A
(3)
|
2972 | 17
ton press. This machine came to us in good condition, so all that
was needed was to replace the brake shoes and anchor.
|
|
|
|||
|
|
|||
